液壓配件與維修

產品描述

繼電器能夠?qū)⒄麄€電路作用的范圍增大，達到控制功率較大的電路目的，讓其可以自動化運轉。繼電器的原理就是當輸入量處在一個定值時，改變它的工作狀態，避免發生意外。

繼電器的正確使用方法

1. 使用繼電器盡可能按照指導書來使用，而且每個參數都要在規定范圍之內，這樣才能保證足夠的安全，然后就是繼電器的負載和使用時間不能確定，因為會根據周邊的環境負載不同做出改變。

2. 若是在室內使用直流繼電器，那就需要矩形波來執行工作，交流繼電器的話，就需要用正弦波來執行工作，另外繼電器最好不要受到撞擊，否則會導致內部元件遭到損壞。

3. 繼電器在使用過程中，要確保周邊環境溫度、濕度適中，且空氣中不能有有毒氣體，這些都會影響繼電器的使用。

免責聲明丨 部分內容來源網絡！本文僅供交流學習 , 版權歸屬原作者，部分圖片、內容推送時未能及時與原作者取得聯系，若來源標注錯誤或侵犯到您的權益煩請告知，我們將立即刪除.

企業介紹

公司供應攤鋪機配件，壓路機配件，銑刨機配件，攤鋪機刮板驅動軸，刮板驅動軸總成，找平儀，找平儀支架以及液壓泵和配件。我廠還供應攤鋪機易損件，攤鋪機平衡梁，攪龍軸，踏板，輸料底板，葉片，熨平板，減速機，鏈軌，履帶板，支重輪，刮板大鏈條，輸料鏈條等。

聯系人：梁經理

Relays can increase the range of the entire circuit, achieving the goal of controlling high-power circuits and allowing them to operate automatically. The principle of a relay is to change its working state when the input is at a fixed value to avoid accidents.

Correct usage of relays

1. When using relays, try to follow the instructions as much as possible, and each parameter must be within the specified range to ensure sufficient safety. However, the load and usage time of the relay cannot be determined, as it will change depending on the surrounding environmental load.

If a DC relay is used indoors, rectangular waves are required to perform the work. For an AC relay, sine waves are required to perform the work. Additionally, it is best not to impact the relay, as it may cause damage to internal components.

During the use of the relay, it is necessary to ensure that the surrounding environment temperature and humidity are moderate, and there are no toxic gases in the air, which can affect the use of the relay.

Disclaimer | Part of the content comes from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly communicated to the original author during push notifications. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it

Enterprise Introduction

The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument support, hydraulic pump and accessories. Our factory also supplies vulnerable parts of paver, balance beam of paver, auger shaft, pedal, conveying bottom plate, blade, screed, reducer, chain rail, track plate, supporting wheel, scraper large chain, conveying chain, etc.

Contact person: Manager Liang

Contact information: 13645201509 (same WeChat account)

QQ：2870202745