
產品描述
承托物料的輸料底板,需與前端張緊軸輥輪和后端驅動軸的節圓相切,否則會出現前端物料刮不凈、后端夾料跳齒等現象。尤其是輸料底板后段圓弧段,經過高點后要遠離鏈輪節圓,否則輸送鏈條倒轉時,其松緊狀況發生轉變,輸料刮板有可能會與圓弧段后端相碰。
免責聲明丨 部分內容來源網絡!本文僅供交流學習 , 版權歸屬原作者,部分圖片、內容推送時未能及時與原作者取得聯系,若來源標注錯誤或侵犯到您的權益煩請告知,我們將立即刪除.
企業介紹
公司供應攤鋪機配件,壓路機配件,銑刨機配件,攤鋪機刮板驅動軸,刮板驅動軸總成,找平儀,找平儀支架以及液壓泵和配件。還供應攤鋪機易損件,攤鋪機平衡梁,攪龍軸,踏板,輸料底板,葉片,熨平板,減速機,鏈軌,履帶板,支重輪,刮板大鏈條,輸料鏈條等。
聯系人:梁經理
聯系方式:13645201509(微信同號)
QQ:2870202745
QQ郵箱:2870202745@qq.com
網易郵箱:LS13645201509@163.com
WhatsApp:+86 13645201509
The feeding bottom plate that supports the material needs to be tangent to the pitch circles of the front tensioning shaft roller and the rear driving shaft, otherwise there may be phenomena such as the front end material not being scraped clean and the rear end material jumping. Especially for the circular arc section at the back of the feeding bottom plate, it is necessary to stay away from the sprocket joint circle after passing through the high point. Otherwise, when the conveying chain reverses, its tightness may change, and the feeding scraper may collide with the rear end of the circular arc section.
Disclaimer | Some content is sourced from the internet! This article is for communication and learning purposes only. The copyright belongs to the original author. Some images and content were not promptly contacted when pushed. If the source annotation is incorrect or infringes on your rights, please inform us and we will immediately delete it
Company Introduction
The company supplies paver accessories, roller accessories, milling machine accessories, paver scraper drive shaft, scraper drive shaft assembly, leveling instrument, leveling instrument bracket, hydraulic pump and accessories. We also supply vulnerable parts for pavers, including balance beams, agitator shafts, pedals, feeding base plates, blades, ironing plates, reducers, chain rails, track plates, support wheels, scraper chains, and feeding chains.
Contact: Manager Liang
Contact information: 13645201509 (same WeChat account)
QQ:2870202745
QQ email: 2870202745@qq.com
NetEase email: LS13645201509@163.com
WhatsApp:+86 13645201509
您的專屬咨詢顧問:張經理
詳細地址:徐州市泉山區段莊街道礦山路百合嘉園2棟303室
備案號1:蘇ICP備16030684號-19



